Creates a network in your home or office without cables
Ensures data and network security with wireless 64- and 128-bit WEP encryption
Offers backward-compatibility with all 802.11b devices
Sets up easily with Belkin Easy Install Wizard-automatically detects Internet settings and self-adjusts Router to get you online in under 3 minutes
This review is from: Belkin Wireless-G Router DSL/Cable GatewayI think this router might be getting a bad rep on the wireless end, because it comes with a proprietary setting enabled by default that I think does more harm than good. If you have this router and are getting intermittent or no wireless connectivity, and you've verified all your settings are right, try this.This router (Belkin model F5D7230-4, and other models) has a (proprietary?) feature called "Protected Mode". The default setting on this model (at least the one I got), unlike other models, has that mode set to "Auto" under the Wireless settings, which I take to mean "on". So turn it off. It's wonky, because even tho it's a proprietary feature, there is NO documentation in the router's online "Help" section. However, it IS described in the user's manual:"As part of the 802.11g specification, Protected mode ensures proper operation of 802.11g clients and access points when there is heavy 802.11b traffic in the operating environment. When protected mode is ON, 802.11g scans for other wireless network traffic before it transmits data. Therefore, using this mode in environments with HEAVY 802.11b traffic or interference achieves best performance results. If you are in an environment with very little--or no--other wireless network traffic, your best performance will be achieved with Protected mode OFF."Okay, so if it works best off, why does it ship in "Auto" mode? Turn it off. On other models, by default it does ships with the feature "off".Basically, I recommend setting this router up as simply as possible, but still having wireless encryption, of course.. So here are my further recommendations for setting this up. There's another (proprietary?) feature called "Turbo" mode. Again, no description of this on the interface itself, but it is described in the manual:"Turbo mode is enabled by default. It allows the Router or Access Point to use frame bursting to deliver the maximum throughput, 2 times faster than any standard 802.11g equipment, to 802.11g clients. This measurement is based on aggregate throughput in a mixed 802.11b and 802.11g environment. Belkin 802.11g clients with the latest driver will support Turbo mode. Clients that do not support Turbo mode will operate normally with it enabled."Again, I recommend turning it off. I also recommend deleting "Belkin Router" from the "domain" section under (I think) LAN settings, just keeping that field blank, and leaving wireless Channel as Auto (default choice, which normally goes to Channel 11 in the USA). And, as with any wireless rouer, you DEFINITELY want to put in a new wi-fi network name (SSID). Change the default SSID to something impersonal, but still unique. Further recommendations are keeping the thing well-ventilated, such as propping it up (securely) at an angle so air flows below it, above, and around the sides, and adjust the antenna of course then so it is vertical. Another thing I did was to turn Range Extension on, but I'm not sure that's necessary or if it just creates unnecessary heat, but since my friend was across the country, I was trying to pull out all the stops.I chose this router for a friend (who purchased it on their own, and then I set it up). I chose it because it was the cheapest one in the store, and Belkin is a generally respected name when it comes to all their equipment (if often having the reputation of being a little expensive), and my past knowledge of their reputation with routers was good. Even though they don't make them themselves, but farm them out to others, their choices in the past have been good. I initially set the router up at my home. I noticed that I had trouble connecting using Vista's wireless connection wizard, and I hate wizards and Vista's "wow" crap in general, so I got frustrated and found a "connect manually" choice, which was a whole lot easier for me, and after that, I was able to connect fine wirelessly for that time I was setting it up. However, my friend took it home and reported back that the laptop wasn't connecting, then it did, and then it stopped after a few minutes. Only then did I come to Amazon and read the reviews, where I saw so many others having similar issues. I suspected Protected and/or Turbo modes, so I did a little research, which confirmed my suspicions. I read a review of a similar Belkin router, the following excerpt summing it succinctly: "[Protected Mode] seems to make the network invisible to wireless devices you may be trying to set up for the first time".With my friend having gone home (across the country), I was relieved to find this router has a r...
Detail Products
Detail Reviews
Click here for more information
»»»Visit Store NOW...
Best price click here
